MACHINES2CLEAN SALES SERVICE HIRE
Heavy duty aggressive stripping scrub pads for hard hard floors.
USE WITH POLISHER MACHINE: Highly abrasive, aggressive for removing floor polishes and finishes to prepare for re-finishing, the coarsest type of pad available, with heavy fibres, an open weave to prevent clogging or loading, use for removing layers of floor polish.
USE WITH SCRUBBER DRYER MACHINE & LOW-FOAM CHEMICAL: Scrub clean hard surfaces, like concrete or stone.
Removes heavy soiling, like concrete splashes, might manage removing certain adhesives such as mastic. Black pads are often used ‘wet’ ie with a stripping solution being applied to the floor, either via a floor scrubber machine or by mop, the solution is then left to act for a few minutes before being scrubbed. Apply using low-speed machine (150-200 rpm) high speed is not suitable for stripping polish. Soiled solution should be extracted by mop or wet-vacuum cleaner, and rinsed.
Black: Stripping/abrasive remove floor coating seal or wax and wet scrubbing strong layers of emulsion floor polishes. Removes the old finish and eliminates concrete burns.
Use with buffing machine: Dry with stripping solution.
Use with scrubber machine: Dry with LOW-FOAM scrub solution.
MACHINE TYPE: Buffer operating up to 200rpm or any scrubber dryer machine for intensive cleaning.
SAFETY: 85mm push-out disc prevents floor pad overheating.
Pads hug uneven floors and can be used on both sides with no loss of efficiency.
Maintenance: Extend life of pads, by using centre push-out-disc middle of pad and brush to clean the overall surface of the pad whilst rinsing with clean water, then hang to dry.
85mm push out centre hole prevents the floor pad from overheating.
Pads hug uneven floor surfaces, can be used both sides without compromising efficiency of the pad. Extend life of pad by forcing out small centre pad and using with clean water to clean the main pad, then hang to dry.
FIVE x 2-SIDED PADS PER PACK.