MACHINES2CLEAN SALES SERVICE HIRE
Stripping pad remove polishes, sealer and dirt.
Wet scrubbing, stripping strong layers of emulsion floor polishes from floor surfaces. Will remove dirt, wax and floor finish sealer. For use with floor stripping agent.
Highly abrasive, aggressive in removing floor polishes and finishes to prepare for re-finishing, the coarsest type of pads available, with heavy fibres, an open weave to prevent clogging or loading, use for removing layers of floor polish.
Removes also, heavy soiling such as concrete splashes, and might manage removing certain adhesives such as mastic. Black pads are often used ‘wet’ ie with a stripping solution being applied to the floor, either via a floor scrubber machine or by mop, the solution is then left to act for a few minutes before being scrubbed. Apply using low-speed machine (150-200 rpm) high speed is not suitable for stripping polish. Soiled solution should be extracted by mop or wet-vacuum cleaner, and rinsed.
85mm push out centre hole prevents the floor pad from overheating.
Pads hug uneven floor surfaces, can be used both sides without compromising efficiency of the pad. Extend life of pad by forcing out small centre pad and using with clean water to clean the main pad, then hang to dry.
5 PADS IN A PACK